Euroklav 29VS+
Euroklav 29 VS+
With single pre-vacuum
Chamber depth: 35 cm, 18 litres
The Euroklav 29 VS+ has an effective vacuum pump which creates a vacuum at the beginning of the sterilization process in order to assist the air evacuation from the chamber and to create a post-vacuum for optimal drying results especially for wrapped goods.
The Euroklav 29 VS+ is designed as a “stand alone” device and only needs a power supply. Without any further installation the autoclave can be operated by its built-in water storage tank for demineralized water and for used water separately.
For a more pleasant operating the Euroklav 29 VS+ can be connected with the water treatment system MELAdem 40 or MELAdem 47 to a water source and drain.
The supply of demineralized water and the drain of the used water will happen automatically.
The required documentation of the sterilization cycles is carried out over the built-in interface connection to the report printer MELAprint 42 or to the connection to the practice PC.
For the optimal employment of the chamber, you can select from three mountings: the mounting C for 6 trays or for 3 standard tray cassettes is standard. Likewise different sterilization containers are available.
Technical Data
Outside dimensions:
|
Width: 42.5 cm x Depth: 57 cm x Height: 48.5 cm |
Chamber: |
ø25 x 35 cm, volume 18 litres |
Tray: |
Width: 19 cm x Depth: 29 cm x Height: 2 cm |
Weight: |
43 kg |
Power supply: |
230 Volt / 50 Hz / 2,300 Watt |
2year warranty on parts and labour
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: